Expert Answers about Trailer Fenders

• Will Chrome Trim Work to Fill Seam at Fenders
• Yes, you can use the Chrome Edge Trim # SAT012ET to fill where the fenders meet the trailer body in the way you are describing.
  view full answer...


• Widest Teardrop Trailer Fenders Available for a Tandem Axle Trailer
• The Tandem Axle Teardrop Trailer Fenders # HP74VR are our widest fenders at 10-3/4" wide. The fenders are 72" long as opposed to the Tandem Axle Teardrop Trailer Fenders # HP44VR that are 66" long but only 9" wide.
  view full answer...


• Replacement Trailer Wheel Fenders For 1999 Escort WT18GA Boat Trailer
• The Fulton Single Axle Trailer Fender with Top and Side Steps # F008585 is also available as a 2-pack # F008585-2 for your 1999 Escort WT18GA Boat Trailer. These universal fit heavy duty fenders are designed for 15" wheel and tires and are capable of supporting up to 300lbs each. The black is molded into the fender so if you rub or scratch the fenders the paint will not come off. These are designed to bolt onto brackets that are 34" apart and up to 4" wide. If you do not have brackets...
  view full answer...


• Are HP34VR Boat Trailer Fenders Available in Chrome
• There is not a chrome version available of the Tandem Axle Teardrop Trailer Fenders for Boat Trailers - Stainless Steel - 14" Wheels - Qty 2 # HP34VR. That said, the # HP34VR being stainless steel with the PVC coating gives them a nice shine that is very similar to chrome. I actually ran out to the warehouse real quick to take a look at the fenders, and if you were to tell people they had a chrome finish, nobody would argue that. There are photos on the product page which are representative...
  view full answer...


• What Are The Holes In Fulton Trailer Fender Used For
• The holes you see in the ends of the Fulton Single Axle Trailer Fender, part # F008559 are used to mount the fender to your trailer. The holes measure approximately 1/2 inch X 3/8 inch, and are spaced 3 inches apart. There is no mounting hardware included so you can use your existing hardware or possibly fabricate mounting brackets to mount the fender. This fender is designed to work with single-axle trailers that have 8 to 12 inch diameter wheels. This fender has a weight capacity of...
  view full answer...


• Can You Add Diamond Plating to Plastic Trailer Step Fenders?
• According to my research, you can technically add plastic diamond plating on a plastic trailer step fender like the CE Smith Single Axle Trailer Fenders w/ Top and Side Steps - Gray Plastic - 12" # CE19502-2. However, with the amount of labor that is required with that process, I recommend purchasing metal fenders that already have diamond plating. For example, the CE Smith Single Axle Trailer Fender - Aluminum Tread Plate - 13" Wheels # CE17960ATB. I went ahead and linked a product page...
  view full answer...


• Replacement Fenders For European Dog Trailer
• The fenders we offer are all made for single axle trailers. I have attached a link to the trailer fenders we offer. They are designed for specific tire sizes. Once you have selected the tire size that matches your trailer tires you can check out the fenders we offer. For example, if you have 14-inch wheels on your trailer and you want a Black plastic fender with a step on the top, part # F008554 may work great for you. If you want to send me photos and dimensions I will be glad to make...
  view full answer...


• Availability of Black Plastic Trailer Fender
• That particular fender is available in Black, and they can be painted if desired. If your trailer has 15 inch wheels, we offer the Fulton Plastic Fender with top and side steps, part # F008585, in black.
  view full answer...


• Can You Purchase Just One Tandem Axle Teardrop Trailer Fenders - Rounded Edges - Steel - 14" to 15"
• The Tandem Axle Teardrop Trailer Fenders - Rounded Edges - Steel - 14" to 15" Wheels part # HP94VR is only offered as a pair but we do offer the Tandem Axle Trailer Fender - Bolt Together - Steel - 14" to 15" Wheels part # HP97VR which is sold individually.
  view full answer...


• Strength of Steel Fender to Withstand 200 lb Utilizing as a Step
• The Single Axle Trailer Fender # HP56VR is made of 14 gauge steel and has one edge that is a 90 degree angle to weld it to your trailer and the other has a more rolled edge. The strength of the fender and ability to hold 200 lbs is based on your mounting. To stand on this fender, you will need to not only weld the edge but also as you stated add brackets which will support the weight. The steel is strong, but I recommend using brackets that can hold the weight on their own to ensure...
  view full answer...


• Option to Replace 9 inch Wide Fender 16050-J on Boat Trailer
• From what I could find, your 16050-J fender is 9" wide x 16-1/2" tall, but you'll want to verify that, as well as the overall length in order to find the best replacement. The CE Smith Single Axle Trailer Fender - Pre-Galvanized Steel - 14" and 15" Wheels # CE17900G is 9" wide x 13" tall and measures 31-1/2" long, so compare that to what you have. For a taller fender that may be a better option due to its 32" long x 9" wide x 16" tall measurement, there is also the CE Smith Single Axle...
  view full answer...


• Can Fulton Single Axle Trailer Fender For 14 Wheels be Painted?
• The Fulton Single Axle Trailer Fender # F008594 can be painted but it won't last long due to the polyethylene plastic it is made from so it is not recommended. The best option, if possible, would be to use a steel fender such as the CE Smith Single Axle Trailer Fender # CE17900G which works with 14" wheels like the Fulton and is 31-1/2" long.
  view full answer...


• Can you Drill Into The Backing Plate for Single Axle Trailer Fenders # HP42FR?
• Yes, you can drill into the Backing Plate # HP42FR. The backing plate itself is not strong enough to support the weight of the Fender # HP48VR so you must make sure you attach the fender itself to your trailer or have Mounting Brackets # CE26098G-2 to attach the fender.
  view full answer...


• Is Fulton Single Axle Trailer Fender with Top and Side Steps # F008583 Right- or Left-Handed
• The Fulton Single Axle Trailer Fender with Top and Side Steps # F008583 that you referenced is not made specifically for one side of a trailer or the other. Since this is a general-purpose replacement fender it can be installed on either side of a trailer in a manner that the user will determine to be safe and effective. Please see the linked video. I also included a link to our main page for trailer fenders where you can use the filters in the left-hand margin to narrow the results to...
  view full answer...


• What is The Proper Way To Measure A Trailer Fender?
• The length of a fender is measured from the longest point, at the very bottom of each end across. Then the height is measured from the tallest point, right in the center. For example, the CE Smith Single Axle Trailer Fender # CE17720 is 22-1/2" long x 7" wide x 8-1/4" tall. I have attached the diagram below to show exactly where you measure from. If you want to send over some measurements of your fender I am happy to see what we can offer you.
  view full answer...


• Can the Fulton Plastic Trailer Fenders Be Painted
• I spoke with my contact at Cequent, the manufacturer of the Fulton Plastic Fenders, and he told me that they can be painted. But there is a catch. You can paint them, but the paint will not stick very well and, consequently, will not last very long. This is because of the polyethylene the fenders are made from. It is not an ideal surface for paint to stick to. This same fender is available in black, # F008582, and silver, # F008592. The color, including white, is molded into these fenders...
  view full answer...


• Is the Tandem Axle Teardrop Trailer Fenders for Enclosed Trailers 15" to 16" Wheels Sold Separately
• The Tandem Axle Teardrop Trailer Fenders part # HP74VR are sold as a pair only.
  view full answer...


• Do Fulton Trailer Fenders Have Mounting Brackets
• There are no specific mounting brackets or part numbers for the Fulton Single Axle Trailer Fender with Top and Side Steps - White Plastic - 14" Wheels # F008574-2. These fenders are meant to use existing hardware or brackets specific to your trailer frame, or you would need to fabricate your own. Some people use the Galvanized Steel, L-Shaped, Bolt-On Brackets # PF775-BKT-2 but these also may require some modification.
  view full answer...


• Trailer Fenders For Small Beverage Cart
• The best way to find the best fenders for your cart is to select the correct fender based on tire size and mounting options. I have attached a link to our product page for the fenders we offer. You can use the filters on the page to select the tire size your cart has and then select fenders that will best work for you. For example, if you have 8 to 12 inch tires you may be interested in the CE Smith Fenders With Skirts, part # CE19500-2. These fenders have a plastic skirt with mounting...
  view full answer...


• How to Paint Galvanized CE Smith Single Axle Trailer Fender
• Thanks for the purchase and that's a good question. In order to paint a galvanized fender such as the CE Smith Single Axle Trailer Fender # CE17700G, you need to use a water-based primer and then a water-based paint. I am guessing that the primer you have currently is oil-based (sometimes called petroleum-based). There are definitely water-based primers and paints for galvanized steel available at local hardware/home improvement stores, just look for something that specifies "galvanized...
  view full answer...